[cisco-voip] Cisco IAD 243X releases NI2 call when receiving minor ISDN messages from PBX

[Vance Shipley]

The difference is between Nortel's NI-1 and NI-2 implementations.
Change the Nortel to NI-1 and it should be happy with the OCN IE.

	-Vance

On Thu, Aug 04, 2005 at 05:15:02PM -0400, Wes Sisk wrote:
}  
}  Looks like 'original called number' is a nortel specific implementation. 
}  Under National ISDN (or primary-ni) this information is conveyed by 
}  redirecting number IE. Are both Cisco and Nortel configured to use the 
}  same trunk type/isdn protocol? Not sure what setting is available on 
}  Nortel to have it accept this IE, but you may try National ISDN instead.
}  
}  /Wes