[cisco-voip] FXO setup

[Burton, Jason]

In my experience I would say 95% of time it's loop start, just depends
on the other end.

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voll, Scott
Sent: Friday, August 05, 2005 2:22 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] FXO setup

 

I don't normally work with FXO ports a lot so I'm a little rusty.

 

Do I use loop start or ground start?  I'm using CM 4.1.3sr1 with MGCP to
a 2801 with 2 port FXO vic.  These are just normal pots lines coming in.

 

Thanks

 

Scott

 

PS.  I currently have the PBX and this VGW patched into the same line
and it sounds like (not very good).  Is this the PBX interfering?  I
don't want to cut over until I have everything working.

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050805/9760bed1/attachment.html