[cisco-voip] SRST -- Am I missing anything

[Voll, Scott]

I would like someone to give me a thumps up or down on my SRST config.
Am I missing anything?  I have it done in CCM.  Made the SRST appearance
and added it to the device pools.


This is CM 4.1.3sr1 with a 2801 running 12.3T code and 4 fxo ports.
DHCP, MGCP, etc. work.  Have not tested SRST yet but would like it to
work when I test it.

Thanks for the input.

Scott

PS.  I think I need to add the destination-pattern and incoming commands
on the other three dial-peers.  Anything else?
!
!
!
dial-peer voice 999011 pots
 application mgcpapp
 destination-pattern 9T
 incoming called-number .
 port 0/1/1
!
dial-peer voice 999000 pots
 application mgcpapp
 port 0/0/0
!
dial-peer voice 999001 pots
 application mgcpapp
 port 0/0/1
!
dial-peer voice 999010 pots
 application mgcpapp
 port 0/1/0
!
!
call-manager-fallback
 max-conferences 4
 ip source-address 10.215.103.1 port 2000
 max-ephones 30
 max-dn 50
 transfer-pattern 12..
 default-destination 1200
!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050815/7f1b03e6/attachment-0001.html