[cisco-voip] SRST -- Am I missing anything

[Erick Bergquist]

Do you have following global, also you may want
dial-peers with more destination patterns and maybe a
explict 911/9911 dial peer.

How about handling inbound calls in fallback, got
connection plar on the voice-port? Might need
translation rules/profiles also depending on dial plan
or call flow needed.


Global commands:

ccm-manager fallback-mgcp

call application alternate default

--- "Voll, Scott" <Scott.Voll at wesd.org> wrote:

> I would like someone to give me a thumps up or down
> on my SRST config.
> Am I missing anything?  I have it done in CCM.  Made
> the SRST appearance
> and added it to the device pools.
> 
> 
> This is CM 4.1.3sr1 with a 2801 running 12.3T code
> and 4 fxo ports.
> DHCP, MGCP, etc. work.  Have not tested SRST yet but
> would like it to
> work when I test it.
> 
> Thanks for the input.
> 
> Scott
> 
> PS.  I think I need to add the destination-pattern
> and incoming commands
> on the other three dial-peers.  Anything else?
> !
> !
> !
> dial-peer voice 999011 pots
>  application mgcpapp
>  destination-pattern 9T
>  incoming called-number .
>  port 0/1/1
> !
> dial-peer voice 999000 pots
>  application mgcpapp
>  port 0/0/0
> !
> dial-peer voice 999001 pots
>  application mgcpapp
>  port 0/0/1
> !
> dial-peer voice 999010 pots
>  application mgcpapp
>  port 0/1/0
> !
> !
> call-manager-fallback
>  max-conferences 4
>  ip source-address 10.215.103.1 port 2000
>  max-ephones 30
>  max-dn 50
>  transfer-pattern 12..
>  default-destination 1200



	
		
__________________________________ 
Do you Yahoo!? 
Yahoo! Mail - You care about security. So do we. 
http://promotions.yahoo.com/new_mail