[cisco-voip] SRST -- Am I missing anything

[Voll, Scott]

I have the global commands.

The dial-peers come with MGCP / voice-port.  Can I add Dial-peers for
SRST?  Do I need to use certain numbers?

When I test SRST, Can I make an ACL to block a phone from CCM or do I
also have to block the VGW?

I don't think I need much for translations etc. as all calls need to go
through the receptionist.  Just need to dial out and have calls come in,
in case the t1 goes down.

Thanks

Scott

-----Original Message-----
From: Erick Bergquist [mailto:erickbe at yahoo.com] 
Sent: Monday, August 15, 2005 4:45 PM
To: Voll, Scott; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] SRST -- Am I missing anything


Do you have following global, also you may want
dial-peers with more destination patterns and maybe a
explict 911/9911 dial peer.

How about handling inbound calls in fallback, got
connection plar on the voice-port? Might need
translation rules/profiles also depending on dial plan
or call flow needed.


Global commands:

ccm-manager fallback-mgcp

call application alternate default

--- "Voll, Scott" <Scott.Voll at wesd.org> wrote:

> I would like someone to give me a thumps up or down
> on my SRST config.
> Am I missing anything?  I have it done in CCM.  Made
> the SRST appearance
> and added it to the device pools.
> 
> 
> This is CM 4.1.3sr1 with a 2801 running 12.3T code
> and 4 fxo ports.
> DHCP, MGCP, etc. work.  Have not tested SRST yet but
> would like it to
> work when I test it.
> 
> Thanks for the input.
> 
> Scott
> 
> PS.  I think I need to add the destination-pattern
> and incoming commands
> on the other three dial-peers.  Anything else?
> !
> !
> !
> dial-peer voice 999011 pots
>  application mgcpapp
>  destination-pattern 9T
>  incoming called-number .
>  port 0/1/1
> !
> dial-peer voice 999000 pots
>  application mgcpapp
>  port 0/0/0
> !
> dial-peer voice 999001 pots
>  application mgcpapp
>  port 0/0/1
> !
> dial-peer voice 999010 pots
>  application mgcpapp
>  port 0/1/0
> !
> !
> call-manager-fallback
>  max-conferences 4
>  ip source-address 10.215.103.1 port 2000
>  max-ephones 30
>  max-dn 50
>  transfer-pattern 12..
>  default-destination 1200



	
		
__________________________________ 
Do you Yahoo!? 
Yahoo! Mail - You care about security. So do we. 
http://promotions.yahoo.com/new_mail