[cisco-voip] CM and Unity Upgrade Questions

[Lelio Fulgenzi]

According to the docs, SR1 is based on ES06 and you are required to uninstall any ES greater than or equal to ES06 before applying the SR. The document is misleading, but I cleared it up with the TAC - ES06 must be removed.

That being said, the Cisco folk on the list will correct me if that's wrong.

  ----- Original Message ----- 
  From: Tech Guy 
  To: cisco-voip at puck.nether.net 
  Sent: Monday, August 15, 2005 5:01 PM
  Subject: [cisco-voip] CM and Unity Upgrade Questions


  I went today to get the new patches to fix the issues related to this
  new worm, for CallManager I went to:

  http://www.cisco.com/cgi-bin/tablebuild.pl/cmva-3des

  >From here I found the hotfixes for CallManager.

  After I got these however it dawned on me that these were for
  CallManager, and so I started looking around for the same hotfixes for
  Unity.  I can't seem to find them though.  Anyone have any ideas on
  where to get the same patches (if they are different) for Unity
  servers?

  Also, we are currently running CallManager 4.1(3)es09, I upgrade to
  this from CM 3.3(2) I think in April I believe, and now I notice there
  is a 4.1(3) SR1.

  I assume SR1 contains everything in es09, plus anything that was fixed
  between it and SR1.

  To upgrade to SR1 from 4.1(3)es09, do you have to order another
  upgrade kit?  I dont see anyplace to download on CCO, so I am assuming
  you have to do that.

  Thanks in advance!

  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050815/abf34fd9/attachment.html