[cisco-voip] CM and Unity Upgrade Questions

[Tech Guy]

I read that in the docs about SR1 being based on ES06, however I did
not see anything about uninstalling anything higher.  I was actually
confused about what I should do since I have ES09, and wondered if the
things that ES09 fixed for us are included in SR1 seeing how it is
based off of es06 ?

The other question then becomes do you really have to uninstall es09
in order to install SR1 ?  I was going to confirm that with TAC
myself.

Regards,
Dane


On 8/15/05, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
> According to the docs, SR1 is based on ES06 and you are required to
> uninstall any ES greater than or equal to ES06 before applying the SR. The
> document is misleading, but I cleared it up with the TAC - ES06 must be
> removed.
>  
> That being said, the Cisco folk on the list will correct me if that's wrong.
>  
> ----- Original Message ----- 
> From: Tech Guy 
> To: cisco-voip at puck.nether.net 
> Sent: Monday, August 15, 2005 5:01 PM
> Subject: [cisco-voip] CM and Unity Upgrade Questions
> 
> I went today to get the new patches to fix the issues related to this
> new worm, for CallManager I went to:
> 
> http://www.cisco.com/cgi-bin/tablebuild.pl/cmva-3des
> 
> >From here I found the hotfixes for CallManager.
> 
> After I got these however it dawned on me that these were for
> CallManager, and so I started looking around for the same hotfixes for
> Unity.  I can't seem to find them though.  Anyone have any ideas on
> where to get the same patches (if they are different) for Unity
> servers?
> 
> Also, we are currently running CallManager 4.1(3)es09, I upgrade to
> this from CM 3.3(2) I think in April I believe, and now I notice there
> is a 4.1(3) SR1.
> 
> I assume SR1 contains everything in es09, plus anything that was fixed
> between it and SR1.
> 
> To upgrade to SR1 from 4.1(3)es09, do you have to order another
> upgrade kit?  I dont see anyplace to download on CCO, so I am assuming
> you have to do that.
> 
> Thanks in advance!