[cisco-voip] CM and Unity Upgrade Questions

[Lelio Fulgenzi]

>From the release notes, this is where I got my confusion.

Under "Version and Description" it says:

Note:     If you are running Cisco CallManager 4.1(3)ES06 or higher, you must  uninstall the Engineering Special (ES) before you can install this Service Release.  (You may lose fixes that were added after ES06 and not included in the SR.)

and under "Important Notes, Recommendations" it says:

Make sure that you are using the correct version of Cisco CallManager software.  Cisco supports upgrades from any Cisco CallManager 4.1(3) release up to 4.1(3)ES06. This SR is based on Engineering Special 06.

----- Original Message ----- 
  From: Tech Guy 
  To: cisco-voip at puck.nether.net 
  Sent: Monday, August 15, 2005 8:27 PM
  Subject: Re: [cisco-voip] CM and Unity Upgrade Questions


  I read that in the docs about SR1 being based on ES06, however I did
  not see anything about uninstalling anything higher.  I was actually
  confused about what I should do since I have ES09, and wondered if the
  things that ES09 fixed for us are included in SR1 seeing how it is
  based off of es06 ?

  The other question then becomes do you really have to uninstall es09
  in order to install SR1 ?  I was going to confirm that with TAC
  myself.

  Regards,
  Dane


  On 8/15/05, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
  > According to the docs, SR1 is based on ES06 and you are required to
  > uninstall any ES greater than or equal to ES06 before applying the SR. The
  > document is misleading, but I cleared it up with the TAC - ES06 must be
  > removed.
  >  
  > That being said, the Cisco folk on the list will correct me if that's wrong.
  >  
  > ----- Original Message ----- 
  > From: Tech Guy 
  > To: cisco-voip at puck.nether.net 
  > Sent: Monday, August 15, 2005 5:01 PM
  > Subject: [cisco-voip] CM and Unity Upgrade Questions
  > 
  > I went today to get the new patches to fix the issues related to this
  > new worm, for CallManager I went to:
  > 
  > http://www.cisco.com/cgi-bin/tablebuild.pl/cmva-3des
  > 
  > >From here I found the hotfixes for CallManager.
  > 
  > After I got these however it dawned on me that these were for
  > CallManager, and so I started looking around for the same hotfixes for
  > Unity.  I can't seem to find them though.  Anyone have any ideas on
  > where to get the same patches (if they are different) for Unity
  > servers?
  > 
  > Also, we are currently running CallManager 4.1(3)es09, I upgrade to
  > this from CM 3.3(2) I think in April I believe, and now I notice there
  > is a 4.1(3) SR1.
  > 
  > I assume SR1 contains everything in es09, plus anything that was fixed
  > between it and SR1.
  > 
  > To upgrade to SR1 from 4.1(3)es09, do you have to order another
  > upgrade kit?  I dont see anyplace to download on CCO, so I am assuming
  > you have to do that.
  > 
  > Thanks in advance!

  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050815/16347aa1/attachment.html