[cisco-voip] Caller ID

[Davis, Michael]

Carlos in Broward county - my old stomping grounds (grew up in Davie). :-)
 
 
You need an FXO with a "M1" designation for Caller-ID. For example: VIC-4FXO-M1.
 
 DNIS for DID calls, obviously is not supported.
 
http://www.cisco.com/en/US/products/hw/voiceapp/ps967/products_data_sheet09186a0080107b55.html

HTH,
 
Mike
 
 
-----Original Message----- 
From: cisco-voip-bounces at puck.nether.net on behalf of Ortiz, Carlos 
Sent: Mon 12/5/2005 1:22 PM 
To: cisco-voip at puck.nether.net 
Cc: 
Subject: [cisco-voip] Caller ID



	Can someone confirm that caller id is not available on FXO ports? I just replaced an old Norstar system with a local SRST gateway and FXO ports but no caller ID is coming through.  I thought I have seen a few people mention that here.  If that is the case any prospects that it may become available in the future?

	 

	Carlos Ortiz

	Senior Information Technology Specialist

	Broward County Office of Information Technology

	Data Communications

	954-357-7981

	cortiz at broward.org