[cisco-voip] Caller ID

[Philip Walenta]

Additionally, you must run H.323, Caller ID on FXO is not supported with
MGCP.

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Davis, Michael
Sent: Monday, December 05, 2005 1:53 PM
To: Ortiz, Carlos; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Caller ID

Carlos in Broward county - my old stomping grounds (grew up in Davie). :-)
 
 
You need an FXO with a "M1" designation for Caller-ID. For example:
VIC-4FXO-M1.
 
 DNIS for DID calls, obviously is not supported.
 
http://www.cisco.com/en/US/products/hw/voiceapp/ps967/products_data_sheet091
86a0080107b55.html

HTH,
 
Mike
 
 
-----Original Message-----
From: cisco-voip-bounces at puck.nether.net on behalf of Ortiz, Carlos
Sent: Mon 12/5/2005 1:22 PM
To: cisco-voip at puck.nether.net
Cc: 
Subject: [cisco-voip] Caller ID



	Can someone confirm that caller id is not available on FXO ports? I
just replaced an old Norstar system with a local SRST gateway and FXO ports
but no caller ID is coming through.  I thought I have seen a few people
mention that here.  If that is the case any prospects that it may become
available in the future?

	 

	Carlos Ortiz

	Senior Information Technology Specialist

	Broward County Office of Information Technology

	Data Communications

	954-357-7981

	cortiz at broward.org

	 

	 


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip