[cisco-voip] VT Advantage Issue
Syed Abbas
syed.abbas at eecu.org
Mon Dec 12 09:06:47 EST 2005
Hello James,
Have you enabled the Video Capabilities for that specific phone on Call
Manager?
Regards,
Syed
-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of
cisco-voip-request at puck.nether.net
Sent: Monday, December 12, 2005 5:12 AM
To: cisco-voip at puck.nether.net
Subject: cisco-voip Digest, Vol 34, Issue 42
Send cisco-voip mailing list submissions to
cisco-voip at puck.nether.net
To subscribe or unsubscribe via the World Wide Web, visit
https://puck.nether.net/mailman/listinfo/cisco-voip
or, via email, send a message with subject or body 'help' to
cisco-voip-request at puck.nether.net
You can reach the person managing the list at
cisco-voip-owner at puck.nether.net
When replying, please edit your Subject line so it is more specific than
"Re: Contents of cisco-voip digest..."
Today's Topics:
1. Setting up a constant voice link (Greg Maiorana)
2. Vt advantage (James)
3. RE: Vt advantage (Jim Koniecki)
4. Setting up a constant voice link (Greg Maiorana)
5. Re: Setting up a constant voice link (Ryan Ratliff)
6. Slips errors in a Q.SIG connection (Ruben Montes)
----------------------------------------------------------------------
Message: 1
Date: Mon, 12 Dec 2005 10:58:39 +1100
From: Greg Maiorana <gmaiorana at ncmail.com.au>
Subject: [cisco-voip] Setting up a constant voice link
To: cisco-voip at puck.nether.net, gmaiorana at ncmail.com.au
Message-ID: <439CBD2F.2020204 at ncmail.com.au>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Hello All,
I trying to work out a solution with a customer to bring their
current pots leased line system to a VoIP solution. The customer
currently has a PSTN leased line from site A to B, which then plugs into
some type of intercom system each end(think of an analog phone on each
end with it off hook all the time).
Is there anyway to do this over VoIP ?
That is have an open link between say 2 x 1721 or 1751 cisco routers
with FXS ports to have an non stop open stream between the FXS port at
each location. So when customer A presses the intercom button to connect
to site B its already open & there is no dialling between the 2 systems.
Any suggestions or idea's would be largely appreciated.
Cheers,
Greg Maiorana.
------------------------------
Message: 2
Date: Mon, 12 Dec 2005 00:07:22 +0000 GMT
From: "James" <jgrace at digitelusa.net>
Subject: [cisco-voip] Vt advantage
To: "CiscosupportUpuck" <cisco-voip at puck.nether.net>
Message-ID:
<1452648987-1134346035-cardhu_blackberry.rim.net-24689- at engine09-cell02>
Content-Type: text/plain
I'm trying to set up vtadvantage. But I'm not having luck on enabling
video on my 7940. I don't see how to make the vidoe icon appear. And
not sure if this is related but when I open vtadvantage it does no
detect my ip phone. I am connected to the ipphone swith
James D. Grace
System Engineer
CCNP CCNA MCSE MCDBA
Digitel Corp.
------------------------------
Message: 3
Date: Sun, 11 Dec 2005 19:37:12 -0500
From: "Jim Koniecki" <jkoniecki at comcast.net>
Subject: RE: [cisco-voip] Vt advantage
To: "'James'" <jgrace at digitelusa.net>, "'CiscosupportUpuck'"
<cisco-voip at puck.nether.net>
Message-ID: <003001c5feb4$31dfdc10$c800a8c0 at Jalbert1>
Content-Type: text/plain; charset="us-ascii"
James,
This is how I have it working
VTadv---(USB)----LAPTOP----IPPhone1001-----SWITCH
VTadv---(USB)----LAPTOP----IPPhone1002-----SWITCH
Then just follow this
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note0
9186
a00802345f4.shtml
Components Used
The information in this document is based on these software and hardware
versions:
Cisco CallManager 4.01 with SR2a or later
Cisco IP phones 7960G and 7940G with phone loads 6.0(4) or later
Jim Koniecki
-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of James
Sent: Sunday, December 11, 2005 7:07 PM
To: CiscosupportUpuck
Subject: [cisco-voip] Vt advantage
I'm trying to set up vtadvantage. But I'm not having luck on enabling
video
on my 7940. I don't see how to make the vidoe icon appear. And not
sure if
this is related but when I open vtadvantage it does no detect my ip
phone.
I am connected to the ipphone swith
James D. Grace
System Engineer
CCNP CCNA MCSE MCDBA
Digitel Corp.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
------------------------------
Message: 4
Date: Mon, 12 Dec 2005 14:38:14 +1100
From: Greg Maiorana <gmaiorana at ncmail.com.au>
Subject: [cisco-voip] Setting up a constant voice link
To: cisco-voip at puck.nether.net
Message-ID: <439CF0A6.6030302 at ncmail.com.au>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Hello All,
Im trying to work out a solution with a customer to bring their
current pots leased line system to a VoIP solution. The customer
currently has a PSTN leased line from site A to B, which then plugs into
some type of intercom system each end(think of an analog phone on each
end with it off hook all the time).
Is there anyway to do this over VoIP ?
That is have an open link between say 2 x 1721 or 1751 cisco routers
with FXS ports to have an non stop open stream between the FXS port at
each location. So when customer A presses the intercom button to connect
to site B its already open & there is no dialling between the 2 systems.
Any suggestions or idea's would be largely appreciated.
Cheers,
Greg Maiorana.
------------------------------
Message: 5
Date: Sun, 11 Dec 2005 23:33:09 -0500
From: Ryan Ratliff <rratliff at cisco.com>
Subject: Re: [cisco-voip] Setting up a constant voice link
To: Greg Maiorana <gmaiorana at ncmail.com.au>
Cc: cisco-voip at puck.nether.net
Message-ID: <30069D7C-F3A2-4F8A-A3ED-2DFA67EEBE0F at cisco.com>
Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed
Isn't this hoot and holler?
12.2T docs:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1839/
products_feature_guide09186a0080087cfc.html
-Ryan
On Dec 11, 2005, at 10:38 PM, Greg Maiorana wrote:
Hello All,
Im trying to work out a solution with a customer to bring their
current pots leased line system to a VoIP solution. The customer
currently has a PSTN leased line from site A to B, which then plugs into
some type of intercom system each end(think of an analog phone on each
end with it off hook all the time).
Is there anyway to do this over VoIP ?
That is have an open link between say 2 x 1721 or 1751 cisco routers
with FXS ports to have an non stop open stream between the FXS port at
each location. So when customer A presses the intercom button to connect
to site B its already open & there is no dialling between the 2 systems.
Any suggestions or idea's would be largely appreciated.
Cheers,
Greg Maiorana.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
------------------------------
Message: 6
Date: Mon, 12 Dec 2005 12:09:08 +0100
From: "Ruben Montes" <Ruben.Montes at eu.didata.com>
Subject: [cisco-voip] Slips errors in a Q.SIG connection
To: <cisco-voip at puck.nether.net>
Message-ID:
<D305A0848689344BB98F14A3F13161B710B497 at eubebrusvex.eu.didata.local>
Content-Type: text/plain; charset="us-ascii"
Hello,
I have a connection between a PBX MD110 and a Cisco router C2851 running
MGCP. I have Slips errors all the time, counter is increasing every few
seconds. Calls are working well but I have a lot of errors. The MD110 is
configured to supply the clock and this is the config in the router:
controller E1 0/0/0
clock source line primary
pri-group timeslots 1-31 service mgcp
!
controller E1 0/0/1
pri-group timeslots 1-31 service mgcp
I configured the 'clock source line primary' in one of them but both
QSiGs have the same Slip errors:
r2851ctp01#sh controllers e1
E1 0/0/0 is up.
Applique type is Channelized E1 - balanced
No alarms detected.
alarm-trigger is not set
Version info Firmware: 20050620, FPGA: 16, spm_count = 0
Framing is CRC4, Line Code is HDB3, Clock Source is Line Primary.
CRC Threshold is 320. Reported from firmware is 320.
Data in current interval (422 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
48 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
48 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail
Secs
E1 0/0/1 is up.
Applique type is Channelized E1 - balanced
No alarms detected.
alarm-trigger is not set
Version info Firmware: 20050620, FPGA: 16, spm_count = 0
Framing is CRC4, Line Code is HDB3, Clock Source is Line.
CRC Threshold is 320. Reported from firmware is 320.
Data in current interval (423 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
48 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
48 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail
Secs
Any idea? The config in the CCM side is almost the default...
Regards,
Ruben
_____
De: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] En nombre de Leetun, Rob
Enviado el: martes, 06 de diciembre de 2005 18:27
Para: Voll, Scott; Lelio Fulgenzi; Jeffrey C. Ollie;
cisco-voip at puck.nether.net
Asunto: RE: [cisco-voip] CDR Reporting Tool
Dido here. Our Oracle developers built a package in Crystal Reports for
management, which spits out about 10 to 15 different reports each month.
Rob
_____
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voll, Scott
Sent: Tuesday, December 06, 2005 10:13 AM
To: Lelio Fulgenzi; Jeffrey C. Ollie; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] CDR Reporting Tool
we used our in house programmers and told them what we needed and they
came up with a custom app for us. Not web based but it interfaces with
our billing system to automagically send bills each month based on total
toll charges. took him about 2.5 hours to do.
Scott
_____
From: cisco-voip-bounces at puck.nether.net on behalf of Lelio Fulgenzi
Sent: Tue 12/6/2005 8:32 AM
To: Jeffrey C. Ollie; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CDR Reporting Tool
I'd also like to hear about such a beast.
But I'd also like to hear about people's experience with setting up
their own reports using a custom SQL report tool. I've looked at a few
out there that seem quite good and allow you to create SQL reports with
user input and are web based.
------------------------------------------------------------------------
--------
Lelio Fulgenzi, B.A.
Network Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"I had a coffee and Coke at lunch today...and now, I've got more jitter
than an IP phone on a long haul 10base2 connection"
LFJ
----- Original Message -----
From: Jeffrey C. Ollie <mailto:jeff at ocjtech.us>
To: cisco-voip at puck.nether.net
Sent: Tuesday, December 06, 2005 11:26 AM
Subject: [cisco-voip] CDR Reporting Tool
Can anyone point me to a CDR reporting tool that:
1) Will directly access the Cisco CDR database (we've used
Infortel but
it discards a lot of the information in the Cisco CDR records).
2) Provides more advanced reporting capabilities than ART
provides.
3) Specifically targeted at CDR reports, not some generic SQL
reporting
tool.
Jeff Ollie
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
https://puck.nether.net/pipermail/cisco-voip/attachments/20051212/f49497
84/attachment.html
------------------------------
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
End of cisco-voip Digest, Vol 34, Issue 42
******************************************
More information about the cisco-voip
mailing list