[cisco-voip] Function of VM Pilot CSS

[Ciscozest]

I got it now. Thanks Lelio.
  ----- Original Message ----- 
  From: Lelio Fulgenzi 
  To: Ciscozest ; cisco-voip at puck.nether.net 
  Sent: Tuesday, December 13, 2005 9:51 PM
  Subject: Re: [cisco-voip] Function of VM Pilot CSS


  Wes also mentioned this: 
    When you check the 'Voicemail' box for CFB/CFNA, we attempt to use the CSS of the Voicemail Pilot by default.  If that is blank then we revert to using the CSS of the originating device.

  --------------------------------------------------------------------------------
  Lelio Fulgenzi, B.A.
  Network Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
  (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
  "I had a coffee and Coke at lunch today...and now, I've got more jitter than an
  IP phone on a long haul 10base2 connection"                                           LFJ
    ----- Original Message ----- 
    From: Ciscozest 
    To: Lelio Fulgenzi ; cisco-voip at puck.nether.net 
    Sent: Tuesday, December 13, 2005 7:48 AM
    Subject: Re: [cisco-voip] Function of VM Pilot CSS


    Hi,

    Here is my setting detail:
    Phone A: Partition = "internal", CSS = "Site1-all", CFB/CFNA to VM.
    VM ports: Partition = "internal", CSS = "Site1-all".
    VM Pilot: CSS = "none"

    Analysis:
    - I can access VM via message button
    - call from phone B to A can be diverted to VM when is not answered. 
    - Unity can dialout to internal and external number.

    in summary I don;t see the funtionality of CSS in VM Pilot Conifguration page. I thought setting "none" CSS would restrict it from dialing a configured partition(s). I use CM 3.3(5)sr1. Anyone can enlighten me? thanks

    regards,
    Robin
      ----- Original Message ----- 
      From: Lelio Fulgenzi 
      To: Robin H ; cisco-voip at puck.nether.net 
      Sent: Tuesday, December 13, 2005 12:38 PM
      Subject: Re: [cisco-voip] Function of VM Pilot CSS


      I won't take credit for this one because Wes straightened it out when I was having a problem. I hope he'll correct me if I've got it wrong.

      The VM Pilot CCS is used when you check the VM box on the line configuration page. If you put anything in the destination field, then it uses the CSS you've selected.

      You'll have to check to see what gets checked if you push FwdAll and then the messages button and/or your vm pilot number.

        ----- Original Message ----- 
        From: Robin H 
        To: cisco-voip at puck.nether.net 
        Sent: Monday, December 12, 2005 11:19 PM
        Subject: [cisco-voip] Function of VM Pilot CSS


        Hi, Can anyone explain to me the function of CSS on VM Pilot configuration page? I set my VM ports and internal phones in a unique partition and CSS. So far has no problem accessing VM. Thanks

        regards,
        Robin


------------------------------------------------------------------------


        _______________________________________________
        cisco-voip mailing list
        cisco-voip at puck.nether.net
        https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20051215/5435f941/attachment-0001.html