[cisco-voip] Cisco 7935 firmware issues

[Voll, Scott]

That was my problem.... So **1 and see what happens.

 

Scott

 

________________________________

From: Lelio Fulgenzi [mailto:lelio at uoguelph.ca] 
Sent: Thursday, December 15, 2005 2:53 PM
To: Voll, Scott; IT; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Cisco 7935 firmware issues

 

will this work if you don't have the password? 

	----- Original Message ----- 

	From: Voll, Scott <mailto:Scott.Voll at wesd.org>  

	To: IT <mailto:it at cimgroup.com>  ; cisco-voip at puck.nether.net 

	Sent: Thursday, December 15, 2005 10:57 AM

	Subject: RE: [cisco-voip] Cisco 7935 firmware issues

	 

	I had some problems with a 7935 and ended up RMA'ing it.  But
after I
	RMA'd it Wes told me how to reset it to Factory defaults.  Might
be
	worth a try.
	
	*********************
	
	Do a **1 from the phone. A dialog will appear asking if you want
to
	delete the phone configuration. Press Yes to clear the complete
setting.
	
	If you press  NO, . it will  put you in the phone setting  menu
screen,
	which also gives  the option in  changing the  passwd.
	
	
	
	**********************
	
	Scott
	
	-----Original Message-----
	From: cisco-voip-bounces at puck.nether.net
	[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of IT
	Sent: Wednesday, December 14, 2005 4:36 PM
	To: cisco-voip at puck.nether.net
	Subject: [cisco-voip] Cisco 7935 firmware issues
	
	Hello,
	
	I have inherited a Cisco 7935 and I am running CM 4.0
	I am having trouble getting the 7935 to pick up new firmware. I
have a
	tftp server running on my CM Publisher, and the device defaults
are set
	correctly for the firmware version. However, the screen only
displays:
	Station IP: 10.96.3.58
	Contacting: 10.96.3.11 (my tftp server)
	
	When I go to http://10.96.3.58 I get:
	Wind Web Server Error Report:
	Server Error: 501 Not Implemented
	No RPM for this combination of URL and method
	/dynaform/index_Dyna.htm
	
	I am able to telnet to 10.96.3.58, but I get a username &
password
	prompt, but I do not know the password, and cisco/cisco doesn't
work.
	
	Does anyone know how else I can force flash this device?
	
	On another note, I had to explicitly set the VLAN on my switch,
as the
	device was picking up the data vlan when connecting, shouldn't
this
	device auto register on the voice vlan?
	
	Thanks,
	Avidan
	
	******************************************************
	This email may contain trade secrets and/or other information
that is 
	proprietary and/or confidential. Use of this by anyone other
than the 
	intended recipient(s) is prohibited and may be unlawful. If you
are not 
	the intended recipient, delete the e-mail and notify us
immediately.
	****************************************************** 
	
	
	_______________________________________________
	cisco-voip mailing list
	cisco-voip at puck.nether.net
	https://puck.nether.net/mailman/listinfo/cisco-voip
	
	_______________________________________________
	cisco-voip mailing list
	cisco-voip at puck.nether.net
	https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20051215/b25038e2/attachment-0001.html