[cisco-voip] Cisco 7935 firmware issues

[Lelio Fulgenzi]

argh. a TAC engineer said I had to RMA and only if I had a contract. grrrr. I'll have to try a **1 and see if it ask for a password.
  ----- Original Message ----- 
  From: Voll, Scott 
  To: Lelio Fulgenzi ; cisco-voip at puck.nether.net 
  Sent: Thursday, December 15, 2005 6:09 PM
  Subject: RE: [cisco-voip] Cisco 7935 firmware issues


  That was my problem.. So **1 and see what happens.

   

  Scott

   


------------------------------------------------------------------------------

  From: Lelio Fulgenzi [mailto:lelio at uoguelph.ca] 
  Sent: Thursday, December 15, 2005 2:53 PM
  To: Voll, Scott; IT; cisco-voip at puck.nether.net
  Subject: Re: [cisco-voip] Cisco 7935 firmware issues

   

  will this work if you don't have the password? 

    ----- Original Message ----- 

    From: Voll, Scott 

    To: IT ; cisco-voip at puck.nether.net 

    Sent: Thursday, December 15, 2005 10:57 AM

    Subject: RE: [cisco-voip] Cisco 7935 firmware issues

     

    I had some problems with a 7935 and ended up RMA'ing it.  But after I
    RMA'd it Wes told me how to reset it to Factory defaults.  Might be
    worth a try.

    *********************

    Do a **1 from the phone. A dialog will appear asking if you want to
    delete the phone configuration. Press Yes to clear the complete setting.

    If you press  NO, . it will  put you in the phone setting  menu screen,
    which also gives  the option in  changing the  passwd.



    **********************

    Scott

    -----Original Message-----
    From: cisco-voip-bounces at puck.nether.net
    [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of IT
    Sent: Wednesday, December 14, 2005 4:36 PM
    To: cisco-voip at puck.nether.net
    Subject: [cisco-voip] Cisco 7935 firmware issues

    Hello,

    I have inherited a Cisco 7935 and I am running CM 4.0
    I am having trouble getting the 7935 to pick up new firmware. I have a
    tftp server running on my CM Publisher, and the device defaults are set
    correctly for the firmware version. However, the screen only displays:
    Station IP: 10.96.3.58
    Contacting: 10.96.3.11 (my tftp server)

    When I go to http://10.96.3.58 I get:
    Wind Web Server Error Report:
    Server Error: 501 Not Implemented
    No RPM for this combination of URL and method
    /dynaform/index_Dyna.htm

    I am able to telnet to 10.96.3.58, but I get a username & password
    prompt, but I do not know the password, and cisco/cisco doesn't work.

    Does anyone know how else I can force flash this device?

    On another note, I had to explicitly set the VLAN on my switch, as the
    device was picking up the data vlan when connecting, shouldn't this
    device auto register on the voice vlan?

    Thanks,
    Avidan

    ******************************************************
    This email may contain trade secrets and/or other information that is 
    proprietary and/or confidential. Use of this by anyone other than the 
    intended recipient(s) is prohibited and may be unlawful. If you are not 
    the intended recipient, delete the e-mail and notify us immediately.
    ****************************************************** 


    _______________________________________________
    cisco-voip mailing list
    cisco-voip at puck.nether.net
    https://puck.nether.net/mailman/listinfo/cisco-voip

    _______________________________________________
    cisco-voip mailing list
    cisco-voip at puck.nether.net
    https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20051215/b4ddd054/attachment.html