[cisco-voip] Caller Name ID possible via Facility IE with H.323?

[Brian Feeny]

Thanks, I have a case open, but I am wanting a clear explanation of the "isdn supp-service name calling", and how it applies, if at all to H.323.

I am going to try to get Hellsouth to switch to Display IE, but I am not holding my breath.

Brian
 
On Thursday, December 15, 2005, at 07:22PM, Bell, Joe <Joe_Bell at adp.com> wrote:

>Brian,
>
>Unless someone knows any pfm, there is no way to accomplish caller-id on
>a PRI with H.323 unless your provider switches the data into Display IE
>(good luck with that).  Recently (using 12.4(4T), I opened a TAC case
>about this issue to see if there was any way to accomplish this or if it
>had been addressed in the new 12.4 train.  TAC sent me a clear answer
>saying H.323 and caller-id are unsupported and in order to get it, I
>needed to go to MGCP.
>
>Joe Bell
>
>-----Original Message-----
>From: cisco-voip-bounces at puck.nether.net
>[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Brian Feeny
>Sent: Thursday, December 15, 2005 11:23 AM
>To: cisco-voip at puck.nether.net
>Subject: [cisco-voip] Caller Name ID possible via Facility IE with
>H.323?
>
>
>I have read the thread:
>
>https://puck.nether.net/pipermail/cisco-voip/2005-March/003509.html
>
>And was curious as to the outcome.  I have PRI's coming in from a 5ESS,
>and the carrier is sending the ID in the facility IE (inbound calls to
>us), and of course CM appears to want it in the display IE.  I have read
>of ways CM would take it via the Facility ID if using MGCP AND NI2/3 or
>MGCP AND QSIG.  Does any solution at all exist for H.323?  I have tried
>to set my switch type for NI and QSIG, both work as far as
>placing/receiving calls, but I still cannot get inbound name id.  I have
>tried to set "isdn supp-service name calling" on the gateway as well but
>it doesn't seem to fix it.  Gateways are running late 12.3T code, CM is
>4.1(3)SR2.
>
>Sure I can try to battle it out with Bellsouth and ask them to change to
>display IE, but I am sure they will not do it for me, I'll try though.
>But I am hoping there is a solution for those of us with H.323 links.  I
>could possibly get them to switch the circuit to NI2 or QSIG.  Like I
>said switching the switch type on the gateway works, without having the
>carrier do anything probably because its just compatible, but not sure
>if formally having them change the switch emulation would do anything.
>The q.931 output is definitely more "friendly" with QSIG/NI, as it
>decodes the facility IE.  With 5ESS it doesn't like to receive the name
>id facility ie stuff, it errors on it (but of course call completes).
>
>Brian
>_______________________________________________
>cisco-voip mailing list
>cisco-voip at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system.
>
>_______________________________________________
>cisco-voip mailing list
>cisco-voip at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-voip
>
>