[cisco-voip] config p2p on my voice gw

[Voll, Scott]

Interface configuration

 

Service-module t1 <framing> or <linecode> 

 

In newer IOS is doesn't show up in the config.

 

 

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of James Grace
Sent: Wednesday, December 28, 2005 10:39 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] config p2p on my voice gw

 

On my gw im trying to config the line code and framing    with ser- mod
XXXX

But they wont show up under the serial int.  Im trying a add the cmd
under the serial interface.  Because this is not a VWIC card.  Can
someone tell me what am I missing 

 

James D. Grace 

CCNP CCNA MCSE MCDBA

Sr. System Engineer / Professional Svc.

Digitel Corporation

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20051228/c97442cc/attachment-0001.html