[cisco-voip] cm location

[Kevin Thorngren]

If you place a call between two phones that have None configured for 
the Location then you have unlimited bandwidth available.  The call 
won't use one of the configured Locations.  It sounds like another 
device, Transcoder maybe, is being invoked that is in one of the 
configured Locations.  CCM traces will show you what is happening.

Kevin
On Dec 29, 2005, at 10:10 AM, James Grace wrote:

> We are having for some issue with not enough bandwidth.  I look at the 
> cm and we have 2 locataions configured.  But on our phone phones the 
> locations is set to none.  Now on those two loacation they were config 
> as limit bandwth on voice and video.   My question is none on the ip 
> phone uses a default of one the the locations settings.  Just 
> wondering if  this is why we are having out of bandwidth issues on the 
> phones
>  
> James D. Grace
> CCNP CCNA MCSE MCDBA
> Sr. System Engineer / Professional Svc.
> Digitel Corporation
>  
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: text/enriched
Size: 1668 bytes
Desc: not available
Url : https://puck.nether.net/pipermail/cisco-voip/attachments/20051229/b284a57e/attachment.bin