[cisco-voip] TCL script to parse *ANI*DNIS*

[Wes Sisk]

htis is Feature group D signaling.  did youtr fgd ds0 group?

also, did you try eana for inbound and outbound?
http://www.cisco.com/en/US/partner/tech/tk652/tk653/ 
technologies_tech_note09186a00800e2560.shtml

otherwise:
http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps1834/ 
products_feature_guide09186a008007fe27.html

/Wes

On Dec 28, 2005, at 12:18 PM, Patrick Mowry wrote:

Hello,
  I have a carrier providing a T1 E&M-II wink start trunk to a Fujitsu
F9600.  They provide caller-id information by formatting the digits send
as *ANI*DNIS.  If I configure the controller as:
ds0-group 1 timeslots 1-24 type e&m-wink-start dnis

I can place outbound calls, but for inbound calls I'll see a number like
*3375551212*3600* , and this of course would not match anything my
dail-peers or CallManager expects.  Can a TCL script be used to break
this number up and pass the caller-id and DID to CallManager?  The IOS
is 12.4T AdvancedIP Services, and CCM 4.1.3sr2

Thanks,

-Patrick

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20051229/e60bff42/attachment.html