[cisco-voip] show incoming calls on a PRI

[Ray Burkholder]

debug isdn q931

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of IT
Sent: Thursday, December 29, 2005 20:47
Cc: Cisco-Voip
Subject: [cisco-voip] show incoming calls on a PRI



My telco says I have new phone numbers on my PRI, but when I dial them I get
a busy tone. The new extensions are 9XXX, and the telco is sending 4 digits.
If I have them send 10 digits, do I need to create a translation pattern in
callmanager?

 

I use 9 for an outside line. How can I tell the calls are coming through? Is
there a debug command I can issue on my 2801 with the serial PRI card?

 

******************************************************
This email may contain trade secrets and/or other information that is 
proprietary and/or confidential. Use of this by anyone other than the 
intended recipient(s) is prohibited and may be unlawful. If you are not 
the intended recipient, delete the e-mail and notify us immediately.
****************************************************** 


-- 
Scanned for viruses & dangerous content at One Unified
<http://www.oneunified.net>  and is believed to be clean. 

-- 
Scanned for viruses and dangerous content at 
http://www.oneunified.net and is believed to be clean.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20051229/5abeb0bb/attachment-0001.html