[cisco-voip] show incoming calls on a PRI

[IT]

My telco says I have new phone numbers on my PRI, but when I dial them I
get a busy tone. The new extensions are 9XXX, and the telco is sending 4
digits. If I have them send 10 digits, do I need to create a translation
pattern in callmanager?

 

I use 9 for an outside line. How can I tell the calls are coming
through? Is there a debug command I can issue on my 2801 with the serial
PRI card?

 


******************************************************
This email may contain trade secrets and/or other information that is 
proprietary and/or confidential. Use of this by anyone other than the 
intended recipient(s) is prohibited and may be unlawful. If you are not 
the intended recipient, delete the e-mail and notify us immediately.
****************************************************** 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20051229/26af2622/attachment.html