[cisco-voip] Lost Translation tables

[Biffle, Gerrad]

If I remember correctly, we experienced a lot of problems with our
Translation patterns when we were on 3.3(2).  We use them for Fire,
Police ringdowns, etc. --- so that had to be working when called upon.
I want to say our move to 3.3(3) resolved the issue.  It may be worth a
quick look at the Bug Toolkit on CCO.

 

Gerrad Biffle

 

 

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Bennett, Cara
Sent: Wednesday, February 02, 2005 4:05 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Lost Translation tables

 

Hi, all~

 

I'm having a terrible time with my translation tables in CCM 3.3(2).  I
have several direct dial numbers that translate to extensions, yet  - on
almost a daily basis - the translation stops working.  It's not that the
record is gone - it just stops working.  If you were to call the direct
dial number, you'd hear "This number is out of order".  To fix the
problem, I have to individually update each record in the table.  Once
the "update" button is clicked - even though no changes were made - the
translation starts working again.

 

Does this happen to anyone else?  Anyone have a solution?  We've tried
shutting down our publisher CM, as well as our single subscriber CM.
We've re-sync'd the databases between the two.  Nothing works.  It's
turning into a regular pain in the...

 

Help?

 

Cara Bennett

bennettc at cf.edu

Central Florida Community College

http://www.cf.edu

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050202/4c26b1a0/attachment.html