[cisco-voip] Lost Translation tables

[Lelio Fulgenzi]

Have you been adding any PLAR phones that use a blank translation? If so, you are more than likely running into this bug: 

CSCea36118 : Inserting or updating a blank xlate removes all xlates 


  ----- Original Message ----- 
  From: Bennett, Cara 
  To: cisco-voip at puck.nether.net 
  Sent: Wednesday, February 02, 2005 4:04 PM
  Subject: [cisco-voip] Lost Translation tables


  Hi, all~

  I'm having a terrible time with my translation tables in CCM 3.3(2).  I have several direct dial numbers that translate to extensions, yet  - on almost a daily basis - the translation stops working.  It's not that the record is gone - it just stops working.  If you were to call the direct dial number, you'd hear "This number is out of order".  To fix the problem, I have to individually update each record in the table.  Once the "update" button is clicked - even though no changes were made - the translation starts working again.

  Does this happen to anyone else?  Anyone have a solution?  We've tried shutting down our publisher CM, as well as our single subscriber CM.  We've re-sync'd the databases between the two.  Nothing works.  It's turning into a regular pain in the...

  Help?

  Cara Bennett
  bennettc at cf.edu
  Central Florida Community College
  http://www.cf.edu


------------------------------------------------------------------------------


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050202/c0b0146e/attachment.html