[cisco-voip] Cisco 7960G Troobles

[Nicolas Chabbey]

I've recently received a Cisco 7960G phone with the factory default
SCCP firmware on it.
As we're using SIP on our network, the first things i've done was to
upgrade but unfortunatly the phone just restarted. By looking on the
TFTP logs and tcpump output, i've seen that the phone crashed and
restarted just after downloading the OS79XX.TXT file without
requesting the image file at any moment.

If i'm putting a SCCP image file name on the OS79XX.TXT (begining with
P003), the phone doesn't crash and request the respective SEP<mac>.xml
file. Unfortunatly (again), just after downloading the xml
configuration it hang and restart. I've checked the syntax and they're
no error on it, if they're one the phone output the error on the
display without crashing. Note that i 've put both with and without
the load information tab, with the same result.

Both statical and DHCP configuration has been tried.
Maybe it's an hardware failure or i've miss somethings realy important :)

Thanks

---------------------------------------------------------
Nicolas Chabbey <eprom at bgp6.info>
Leafnet Networking Laboratory
http://www.bgp6.info
---------------------------------------------------------