[cisco-voip] Cisco 7960G Troobles

[Candace Holman]

I had the same problem in upgrading to sip load 7.3, P0S3-07-3-00.  The 
OS79XX.TXT that is supplied in the Cisco zip file has a typo in it.  Look 
in the archives for January for a message from Jared Mauch that addresses 
the problem for other sip versions.

Make sure the OS79XX.TXT contains the file name of the .bin or .sbn file, 
NOT the .sb2 file name.

Candace

At 05:47 PM 2/2/2005, Nicolas Chabbey wrote:
>I've recently received a Cisco 7960G phone with the factory default
>SCCP firmware on it.
>As we're using SIP on our network, the first things i've done was to
>upgrade but unfortunatly the phone just restarted. By looking on the
>TFTP logs and tcpump output, i've seen that the phone crashed and
>restarted just after downloading the OS79XX.TXT file without
>requesting the image file at any moment.
>
>If i'm putting a SCCP image file name on the OS79XX.TXT (begining with
>P003), the phone doesn't crash and request the respective SEP<mac>.xml
>file. Unfortunatly (again), just after downloading the xml
>configuration it hang and restart. I've checked the syntax and they're
>no error on it, if they're one the phone output the error on the
>display without crashing. Note that i 've put both with and without
>the load information tab, with the same result.
>
>Both statical and DHCP configuration has been tried.
>Maybe it's an hardware failure or i've miss somethings realy important :)
>
>Thanks
>
>---------------------------------------------------------
>Nicolas Chabbey <eprom at bgp6.info>
>Leafnet Networking Laboratory
>http://www.bgp6.info
>---------------------------------------------------------
>_______________________________________________
>cisco-voip mailing list
>cisco-voip at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-voip