[cisco-voip] CME AA TCL Script

[Andrew Dignan]

I cannot get the AA TCL script to "trigger".  Inbound calls match the
dial-peer I need it to based on the debug message below:

*Feb  5 20:09:40.947: %CALL_CONTROL-6-APP_NOT_FOUND: Application autoatt
in dial-peer 10 not found.

However, it does not trigger.  Below is part of my config.  Application
"autoatt" exists, and it is in flash.  Anyone see anything I missing here?

call application voice autoatt flash:its_CISCO.2.0.1.0.tcl
call application voice autoatt aa-pilot 2002
call application voice autoatt operator 2000
call application voice autoatt its_CISCO.2.0.1.0.tcl flash:
call application voice autoatt language 1 en
call application voice autoatt set-location en 0 flash:

voice-port 1/1/0
 translation-profile incoming Prefix_1
 caller-id enable

dial-peer voice 10 pots
 description 11 Digit Dialing
 application autoatt
 destination-pattern 1[2-9].........
 port 1/1/0
 forward-digits all