[cisco-voip] Caller ID on MGCP FXS Port

[Wes Sisk]

analog mgcp does not yet support callerid, you will need to use h323.

/Wes

Court Schuett wrote:

>Hello,
>
>I've got a Gold Fax fax server set up to run off of 4 FXS ports on an
>ICS. I have two small hunt groups set up to handle the inbound calls but
>I'm having trouble passing the caller id information into the fax lines.
>
>What I would like to do is this:
>HP: 7060 -> hunt group that routes to FaxModem1 on server and passes a
>predetermined number (it can really be anything) to the fax server.
>HP: 7050 -> hunt group that routes to FaxModem2-4 on server and passes a
>different predetermined number.
>
>I have almost everything set up. I have both hunt groups set up and
>working correctly. 7060 is ringing to the correct modem, and 7050 is
>ringing to all three modems (longest idle) correctly. The only problem
>is that I can't seem to pass any sort of caller id to the FXS ports.
>I've hooked up a regular analog phone and it's not getting anything
>either. The CCM is connected to the FXS ports with MGCP.
>
>CCM: 4.0(1)sr2a
>HW: ICS7750-MRP300 (MPC860P)
>SW: 12.3(2)XA
>
>Any ideas?
>
>Thanks.
>
>_______________________________________________
>cisco-voip mailing list
>cisco-voip at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-voip
>  
>