[cisco-voip] Adding components to an installed CRS 3.1 box

[Lelio Fulgenzi]

These components are installed as options based on the PAK code on the CD. At the time we installed our test centre we were not using these, so we decided not to install them. 

Now only if I could find those CDs. :O
  ----- Original Message ----- 
  From: Voll, Scott 
  To: Lelio Fulgenzi ; cisco-voip at puck.nether.net 
  Sent: Wednesday, February 09, 2005 12:50 PM
  Subject: RE: [cisco-voip] Adding components to an installed CRS 3.1 box


  Have you tried to add the licensing?  I was under the impression that everything loaded with the CRS install but the licenses made them work.  

   

  Scott

   


------------------------------------------------------------------------------

  From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
  Sent: Wednesday, February 09, 2005 7:53 AM
  To: cisco-voip at puck.nether.net
  Subject: [cisco-voip] Adding components to an installed CRS 3.1 box

   

  We've got a CRS 3.1(2) box up and running in our test centre but it does not have VOIP monitoring and stats (RASCAL) server installed. Is there a way to add these components without reinstalling the whole thing?

   

  --------------------------------------------------------------------------------
  Lelio Fulgenzi, B.A.
  Network Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
  (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
   
  "That's a UNIX book. Cool!" -- Garth 
  --------------------------------------------------------------------------------
   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050209/07e14cda/attachment.html