[cisco-voip] Problems with CallerID on a PRI connected to
PA-VXC-2TE1
peter.casanave at us.army.mil
peter.casanave at us.army.mil
Wed Feb 9 14:26:43 EST 2005
good to know...thanks
V/R,
PETER CASANAVE
SFC, USA
BBN Platoon Sergeant
----- Original Message -----
From: John Lange <john.lange at open-it.ca>
Date: Wednesday, February 9, 2005 12:58 pm
Subject: Re: [cisco-voip] Problems with CallerID on a PRI connected to PA-VXC-2TE1
> For anyone following this thread, Problem SOLVED!
>
> As it turns out, IOS 12.2.15t has a bug which prevents outbound
> calleridfrom working between switch type dms100.
>
> Bug ID# CSC dx50282
>
> An upgrade to 12.3.8t solved the problem.
>
> Nothing like two weeks of messing around with configurations only to
> discover its a firmware bug.
>
> Thanks to everyone who offered suggestions.
>
> --
> John Lange
>
>
> On Tue, 2005-02-08 at 16:54, peter.casanave at us.army.mil wrote:
> > What version of CCM are you using and have you verified
> presentation setting on the CCM software? One easy test is a debug
> dial-peer. The results typically show the number dialed and the
> peer matches followed by dialing number forwarded to the router.
> >
> > V/R,
> > PETER CASANAVE
> > SFC, USA
> > BBN Platoon Sergeant
> >
> > ----- Original Message -----
> > From: John Lange <john.lange at open-it.ca>
> > Date: Tuesday, February 8, 2005 4:17 pm
> > Subject: Re: [cisco-voip] Problems with CallerID on a PRI
> connected to PA-VXC-2TE1
> >
> > > Thanks Peter.
> > >
> > > To answer your questions;
> > >
> > > show dial-peer voice shows "none" for CLID restriction.
> > >
> > > Incoming callerid name and number is working perfectly. We see
> it
> > > on the
> > > router just fine for calls coming in from the PRI as well as
> incoming> > SIP calls.
> > >
> > > We were aware of the document at the link you sent and it has
> > > given us
> > > some ideas to try but still we haven't got it working.
> > >
> > > Thanks for your suggestions and please feel free to make some
> more.> >
> > > John
> > >
> > > On Tue, 2005-02-08 at 12:51, peter.casanave at us.army.mil wrote:
> > > > when you do the show dial-peer voice ### command do you see
> CLID
> > > restriction under codec display? Also, on the router do you
> see
> > > the CLID coming in?
> > > >
> > > > V/R,
> > > > PETER CASANAVE
> > > > SFC, USA
> > > > BBN Platoon Sergeant
> > > >
> > > > ----- Original Message -----
> > > > From: John Lange <john.lange at open-it.ca>
> > > > Date: Tuesday, February 8, 2005 12:27 pm
> > > > Subject: Re: [cisco-voip] Problems with CallerID on a PRI
> > > connected to PA-VXC-2TE1
> > > >
> > > > > Thanks Dave.
> > > > >
> > > > > Unfortunately we tried that setting but it had no effect.
> > > > >
> > > > > Its very confusing to me how the Name information could be
> passing> > > > properly but not the number info.
> > > > >
> > > > > If you have any other suggestions I'd be glad to hear them.
> > > > >
> > > > > Thanks.
> > > > >
> > > > > John
> > > > >
> > > > >
> > > > > On Mon, 2005-02-07 at 12:22, Dave Temkin wrote:
> > > > > > Try:
> > > > > >
> > > > > > isdn outgoing display-ie
> > > > > > on your serial interface for the PRI
> > > > > >
> > > > > >
> > > > > >
> > > > > > -Dave
> > > > > >
> > > > > > On Mon, 7 Feb 2005, John Lange wrote:
> > > > > >
> > > > > > > We have an Asterisk Phone system that places outbound
> > > calls
> > > > > using SIP
> > > > > > > via a Cisco PA-VXC-2TE1+ card connected to an
> Allstream PRI.
> > > > > > >
> > > > > > > Try as we might we can not get callerid number working
> on
> > > outbound> > > > calls.
> > > > > > >
> > > > > > > Strangely, CallerID name display works perfectly fine.
> > > > > > >
> > > > > > > Allstream insists that their equipment is configured
> > > correctly
> > > > > and that
> > > > > > > they will accept the name/number we set on calls.
> > > > > > >
> > > > > > > So the question is, what is the setting on the Cisco
> so
> > > that
> > > > > it passes
> > > > > > > CID name and number?
> > > > > > >
> > > > > > > The following is the trace provided by Allstream on a
> > > sample
> > > > > outbound> > call from our equipment. As you can see DSP is
> set
> > > > > properly to the name
> > > > > > > but there is no CGN portion. (From my conversations
> with
> > > them my
> > > > > > > understanding is the CGN is the number, DSP is the name?)
> > > > > > >
> > > > > > > Below this trace is the current configuration for the
> Cisco.> > > > > >
> > > > > > > Any suggestions are welcome.
> > > > > > >
> > > > > > > Thanks.
> > > > > > >
> > > > > > > --------------
> > > > > > >
> > > > > > > <== 03:12:51:05.11 (CM Time: 02:15:56:55.12).
> > > > > > > <== Q931: SETUP: from S[7040] L[1,186,0]
> E[26,185,0]
> > > SPA[--
> > > > > --]
> > > > > > > CR: 0,01 6C
> > > > > > > BC: speech
> > > > > > > 64 kbit/s
> > > > > > > circuit mode
> > > > > > > mu-law speech
> > > > > > > CID: 18
> > > > > > > LENGTH: 03
> > > > > > > Channel Selection Info: As Indicated in
> Following
> > > Octets> > > > D-Channel Indicator: D-Channel NOT indicated
> > > > > > > Preferred/Exclusive: Exclusive
> > > > > > > Interface type = primary rate
> > > > > > > Interface Identifier: IID Implicitly Identified
> > > > > > > Channel Type: B - Channel Units (3).
> > > > > > > Number Map: Channel is indicated by the number
> > > following.> > > > Coding Standard: CCITT
> > > > > > > Channel Number = 23
> > > > > > > DSP: ±OpenIT
> > > > > > > CDN: unknown
> > > > > > > unknown
> > > > > > > 14162045956
> > > > > > > --------------
> > > > > > >
> > > > > > >
> > > > > > > Current configuration : 3012 bytes
> > > > > > > !
> > > > > > > ! Last configuration change at 14:10:36 CST Thu Feb 3 2005
> > > > > > > ! NVRAM config last updated at 13:54:27 CST Tue Feb 1 2005
> > > > > > > !
> > > > > > > version 12.2
> > > > > > > service timestamps debug datetime msec
> > > > > > > service timestamps log datetime msec
> > > > > > > service password-encryption
> > > > > > > !
> > > > > > > hostname WPG-SIPgw-01
> > > > > > > !
> > > > > > > boot system slot0:c7200-is-mz.122-15.T14.bin
> > > > > > > card type t1 1
> > > > > > > logging queue-limit 100
> > > > > > > enable secret 5 ***REMOVED***
> > > > > > > !
> > > > > > > clock timezone CST -6
> > > > > > > clock summer-time CDT recurring 1 Sun Apr 2:00 4 Sun
> Oct 2:00
> > > > > > > dspint DSPfarm1/0
> > > > > > > !
> > > > > > > ip subnet-zero
> > > > > > > !
> > > > > > > !
> > > > > > > ip cef
> > > > > > > !
> > > > > > > isdn switch-type primary-dms100
> > > > > > > !
> > > > > > > !
> > > > > > > !
> > > > > > > voice service voip
> > > > > > > sip
> > > > > > > !
> > > > > > > !
> > > > > > > !
> > > > > > > !
> > > > > > > !
> > > > > > > !
> > > > > > > !
> > > > > > > no voice hpi capture buffer
> > > > > > > no voice hpi capture destination
> > > > > > > !
> > > > > > > !
> > > > > > > mta receive maximum-recipients 0
> > > > > > > !
> > > > > > > !
> > > > > > > controller T1 1/0
> > > > > > > framing esf
> > > > > > > linecode b8zs
> > > > > > > cablelength long 0db
> > > > > > > pri-group timeslots 1-24
> > > > > > > !
> > > > > > > controller T1 1/1
> > > > > > > shutdown
> > > > > > > framing esf
> > > > > > > linecode b8zs
> > > > > > > cablelength long 0db
> > > > > > > !
> > > > > > > !
> > > > > > > !
> > > > > > > interface FastEthernet0/0
> > > > > > > ip address XXX.XXX.106.150 255.255.255.0
> > > > > > > duplex full
> > > > > > > !
> > > > > > > interface Serial1/0:23
> > > > > > > no ip address
> > > > > > > no logging event link-status
> > > > > > > isdn switch-type primary-dms100
> > > > > > > isdn incoming-voice voice
> > > > > > > no cdp enable
> > > > > > > !
> > > > > > > ip classless
> > > > > > > ip route 0.0.0.0 0.0.0.0 XXX.XXX.106.1
> > > > > > > no ip http server
> > > > > > > !
> > > > > > > !
> > > > > > > !
> > > > > > > access-list 10 permit XXX.XXX.106.4
> > > > > > > access-list 10 permit XXX.XXX.106.5
> > > > > > > !
> > > > > > > !
> > > > > > > call rsvp-sync
> > > > > > > !
> > > > > > > voice-port 1/0:23
> > > > > > > !
> > > > > > > !
> > > > > > > mgcp profile default
> > > > > > > !
> > > > > > > dial-peer cor custom
> > > > > > > !
> > > > > > > !
> > > > > > > !
> > > > > > > dial-peer voice 100 voip
> > > > > > > application session
> > > > > > > destination-pattern XXXXX54235
> > > > > > > progress_ind setup enable 3
> > > > > > > session protocol sipv2
> > > > > > > session target ipv4:XXX.XXX.99.50
> > > > > > > session transport udp
> > > > > > > !
> > > > > > > dial-peer voice 101 voip
> > > > > > > application session
> > > > > > > destination-pattern XXXXX54236
> > > > > > > progress_ind setup enable 3
> > > > > > > session protocol sipv2
> > > > > > > session target ipv4:XXX.XXX.102.59
> > > > > > > session transport udp
> > > > > > > !
> > > > > > > dial-peer voice 5000 pots
> > > > > > > application session
> > > > > > > destination-pattern .......
> > > > > > > direct-inward-dial
> > > > > > > port 1/0:23
> > > > > > > !
> > > > > > > dial-peer voice 102 voip
> > > > > > > application session
> > > > > > > destination-pattern XXXXX74002
> > > > > > > progress_ind setup enable 3
> > > > > > > session protocol sipv2
> > > > > > > session target ipv4:XXX.XXX.102.59
> > > > > > > session transport udp
> > > > > > > !
> > > > > > > dial-peer voice 103 voip
> > > > > > > application session
> > > > > > > destination-pattern XXXXX74003
> > > > > > > progress_ind setup enable 3
> > > > > > > session protocol sipv2
> > > > > > > session target ipv4:XXX.XXX.102.59
> > > > > > > session transport udp
> > > > > > > codec g711ulaw
> > > > > > > !
> > > > > > > dial-peer voice 104 voip
> > > > > > > application session
> > > > > > > destination-pattern XXXXX74004
> > > > > > > progress_ind setup enable 3
> > > > > > > session protocol sipv2
> > > > > > > session target ipv4:XXX.XXX.102.59
> > > > > > > session transport udp
> > > > > > > !
> > > > > > > dial-peer voice 105 voip
> > > > > > > destination-pattern XXXXX74005
> > > > > > > progress_ind setup enable 3
> > > > > > > session protocol sipv2
> > > > > > > session target ipv4:XXX.XXX.102.59
> > > > > > > session transport udp
> > > > > > > !
> > > > > > > dial-peer voice 5001 pots
> > > > > > > incoming called-number 1..........
> > > > > > > direct-inward-dial
> > > > > > > port 1/0:23
> > > > > > > prefix 1
> > > > > > > !
> > > > > > > sip-ua
> > > > > > > calling-info sip-to-pstn number set XXXXX74006
> > > > > > > !
> > > > > > > !
> > > > > > > gatekeeper
> > > > > > > shutdown
> > > > > > > !
> > > > > > > !
> > > > > > > line con 0
> > > > > > > stopbits 1
> > > > > > > line aux 0
> > > > > > > stopbits 1
> > > > > > > line vty 0 4
> > > > > > > access-class 10 in
> > > > > > > exec-timeout 60 0
> > > > > > > password ***REMOVED***
> > > > > > > login
> > > > > > > !
> > > > > > > ntp clock-period 17180028
> > > > > > > ntp server XXX.XXX.111.252
> > > > > > > !
> > > > > > > end
> > > > > > >
> > > > > > >
> > > > >
> > > > > _______________________________________________
> > > > > cisco-voip mailing list
> > > > > cisco-voip at puck.nether.net
> > > > > https://puck.nether.net/mailman/listinfo/cisco-voip
> > > > >
> > > --
> > >
> > > _______________________________________________
> > > cisco-voip mailing list
> > > cisco-voip at puck.nether.net
> > > https://puck.nether.net/mailman/listinfo/cisco-voip
> > >
>
>
More information about the cisco-voip
mailing list