[cisco-voip] CCM - resetting Gateway

[Ryan Ratliff]

Actually a reset should reboot the phone.  Restart will make the phone 
"blink" and the display will be updated.

IIRC for an MGCP gateway restart waits for all calls to be finished 
before making the endpoint reregister.  Reset drops calls and does it 
immediately.  Note that resetting from the CCMAdmin only works when you 
have 'ccm-manager config' and 'ccm-manager config server' configured on 
the gateway.  If you don't have those you have to do a 'no mgcp', 
'mgcp' to reset the gw.

For an H.323 gateway I'm not 100% sure what the difference is between 
restart and reset.

-Ryan
On Feb 10, 2005, at 4:21 AM, Stork, D.H. (Duncan) wrote:

If you really want to find out without causing interupting important 
"managers calls" .... :-) ..... you can try it out with a single VoIP 
hardphone; change the displayname, place your call and reset. You'll 
also have the option of resetting or restarting the phone, just like 
the gateway. Just watch what happens. Reset will cause the phone to 
"lose it's display", while restarting will do nothing visually but 
changing the displayname as configured.
 
Duncan
-----Oorspronkelijk bericht-----
Van: Vincent De Keyzer [mailto:vincent at dekeyzer.net]
Verzonden: woensdag 9 februari 2005 16:23
Aan: 'Stork, D.H. (Duncan)'
CC: cisco-voip at puck.nether.net
Onderwerp: RE: [cisco-voip] CCM - resetting Gateway


Because it only « tries » to preserve active calls... How hard is it 
trying? J

 

Vincent

 

 


From: Stork, D.H. (Duncan) [mailto:d.h.stork at minlnv.nl]
  Sent: mercredi 9 février 2005 16:13
To: 'Vincent De Keyzer'
Cc: 'cisco-voip at puck.nether.net'
Subject: RE: [cisco-voip] CCM - resetting Gateway

 

Vincent,

 

If it's not registered you can't change the config of the gateway 
through the CCM. Is the config of the network ok?

 

If you reset the gateway through CCM it will shut down the 
gateway, drop all active calls and bring it back up. It's a sort of 
"reboot"

If you restart the gateway through CCM it will only reset the gateway, 
but tries to preserve active calls during this procedure.

 

Why not just restart?

 

With kind regards,

 

Duncan Stork

 

-----Oorspronkelijk bericht-----
Van: Vincent De Keyzer [mailto:vincent at dekeyzer.net]
Verzonden: woensdag 9 februari 2005 15:49
Aan: cisco-voip at puck.nether.net
Onderwerp: [cisco-voip] CCM - resetting Gateway

Hello,

 

I have made changes to a gateway and CCM has asked me to reset it.

 

When I press the "Reset Gateway" button, it says: "If a gateway is not 
registered with Cisco CallManager, you cannot reset or restart it.". 
The gateway in question is not registered.

 

It also says: "Restarting or resetting an H323 gateway does not 
physically restart/reset the gateway; it only reinitializes the 
configuration loaded by Cisco CallManager."

 

My questions are:
	1.  	May I safely reset/restart my non-registered H.323 gateway?
	2.  	What's the difference between 'reset' and 'restart' in this case?

 

Vincent

 

 

 

 

 
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip