[cisco-voip] CCM - resetting Gateway

[Stork, D.H. (Duncan)]

If you really want to find out without causing interupting important
"managers calls" .... :-) ..... you can try it out with a single VoIP
hardphone; change the displayname, place your call and reset. You'll also
have the option of resetting or restarting the phone, just like the gateway.
Just watch what happens. Reset will cause the phone to "lose it's display",
while restarting will do nothing visually but changing the displayname as
configured.
 
Duncan

-----Oorspronkelijk bericht-----
Van: Vincent De Keyzer [mailto:vincent at dekeyzer.net]
Verzonden: woensdag 9 februari 2005 16:23
Aan: 'Stork, D.H. (Duncan)'
CC: cisco-voip at puck.nether.net
Onderwerp: RE: [cisco-voip] CCM - resetting Gateway



Because it only « tries » to preserve active calls... How hard is it trying?
:-)

 

Vincent

 

 


  _____  


From: Stork, D.H. (Duncan) [mailto:d.h.stork at minlnv.nl] 
Sent: mercredi 9 février 2005 16:13
To: 'Vincent De Keyzer'
Cc: 'cisco-voip at puck.nether.net'
Subject: RE: [cisco-voip] CCM - resetting Gateway

 

Vincent,

 

If it's not registered you can't change the config of the gateway through
the CCM. Is the config of the network ok?

 

If you reset the gateway through CCM it will shut down the gateway, drop all
active calls and bring it back up. It's a sort of "reboot"

If you restart the gateway through CCM it will only reset the gateway, but
tries to preserve active calls during this procedure.

 

Why not just restart?

 

With kind regards,

 

Duncan Stork

 

-----Oorspronkelijk bericht-----
Van: Vincent De Keyzer [mailto:vincent at dekeyzer.net]
Verzonden: woensdag 9 februari 2005 15:49
Aan: cisco-voip at puck.nether.net
Onderwerp: [cisco-voip] CCM - resetting Gateway

Hello,

 

I have made changes to a gateway and CCM has asked me to reset it.

 

When I press the "Reset Gateway" button, it says: "If a gateway is not
registered with Cisco CallManager, you cannot reset or restart it.". The
gateway in question is not registered.

 

It also says: "Restarting or resetting an H323 gateway does not physically
restart/reset the gateway; it only reinitializes the configuration loaded by
Cisco CallManager."

 

My questions are:

1.	May I safely reset/restart my non-registered H.323 gateway? 

2.	What's the difference between 'reset' and 'restart' in this case? 

 

Vincent

 

 

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050210/2a748220/attachment-0001.html