[cisco-voip] Adding components to an installed CRS 3.1 box

[Tim Medley]

You have to re-run the installation program. It will only install the pieces
you check to install and it is supposed to not overwrite your existing
configuration info. I would backup my scripts just in case. I had some
issues installing the RASCAL and VOIP server on an IPCCE Box awhile ago, and
it blew away my config. In cisco's defense, the box had been upgraded from
3.0(1) to 3.1 and then to 3.5(1) before adding the Rascal and Voip monitor
components.

 

tm

 

Tim Medley

 

http://www.medleylabs.com

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Wednesday, February 09, 2005 7:53 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Adding components to an installed CRS 3.1 box

 

We've got a CRS 3.1(2) box up and running in our test centre but it does not
have VOIP monitoring and stats (RASCAL) server installed. Is there a way to
add these components without reinstalling the whole thing?

 

----------------------------------------------------------------------------
----
Lelio Fulgenzi, B.A.
Network Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
 
"That's a UNIX book. Cool!" -- Garth 
----------------------------------------------------------------------------
----
 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050210/e708fe8f/attachment.html