[cisco-voip] Adding components to an installed CRS 3.1 box

[Lelio Fulgenzi]

Our box was originally a 3.0 box as well, then upgraded to 3.1(2) then patched. My over-install (if that's even a term) didn't succeed entirely. VOIP Monitoring installed, but the RASCAL server did not. No meaningful log entries that I could find. 

I'll be uninstalling everything CRS based from the server and starting from scratch. Hopefully that will get the RASCAL server installed. 

RASCAL Server. How apropos.

-----                                                                -----
Lelio Fulgenzi, B.A.                                  lelio at uoguelph.ca.eh
Network Analyst (CCS)
University of Guelph                             FAX:(519) 767-1060 JNHN
Guelph, Ontario N1G 2W1                          TEL:(519) 824-4120 x56354
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
     remove the 1st letter of the canadian alphabet from my email, eh!
  ----- Original Message ----- 
  From: Tim Medley 
  To: 'Lelio Fulgenzi' ; cisco-voip at puck.nether.net 
  Sent: Thursday, February 10, 2005 10:35 PM
  Subject: RE: [cisco-voip] Adding components to an installed CRS 3.1 box


  You have to re-run the installation program. It will only install the pieces you check to install and it is supposed to not overwrite your existing configuration info. I would backup my scripts just in case. I had some issues installing the RASCAL and VOIP server on an IPCCE Box awhile ago, and it blew away my config. In cisco's defense, the box had been upgraded from 3.0(1) to 3.1 and then to 3.5(1) before adding the Rascal and Voip monitor components.

   

  tm

   

  Tim Medley

   

  http://www.medleylabs.com


------------------------------------------------------------------------------

  From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
  Sent: Wednesday, February 09, 2005 7:53 AM
  To: cisco-voip at puck.nether.net
  Subject: [cisco-voip] Adding components to an installed CRS 3.1 box

   

  We've got a CRS 3.1(2) box up and running in our test centre but it does not have VOIP monitoring and stats (RASCAL) server installed. Is there a way to add these components without reinstalling the whole thing?

   

  --------------------------------------------------------------------------------
  Lelio Fulgenzi, B.A.
  Network Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
  (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
   
  "That's a UNIX book. Cool!" -- Garth 
  --------------------------------------------------------------------------------
   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050210/a5af063b/attachment.html