[cisco-voip] g711 sample size in CCM - 10ms or 20ms

[Louis R. Marascio]

There is a system parameter that set the preferred frame size.  Look
under the "Clusterwide Parameters (System - Location and Region)"
parameters under system parameters.

Louis

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Erick B.
Sent: Thursday, February 10, 2005 11:52 PM
To: andy at dignans.com; cisco-voip at puck.nether.net
Subject: [cisco-voip] g711 sample size in CCM - 10ms or 20ms

I'm trying to figure out where to see/set the g711ulaw sample size in
CCM that it uses for phone calls. 

I have a client with a voip monitoring device that is set to 10ms g711
and it is giving some SLA errors. I just want to double check on CCM
side if it is to 10ms or 20ms. This box has a 10 or 20mx setting for the
codec. 


		
__________________________________
Do you Yahoo!? 
Yahoo! Mail - now with 250MB free storage. Learn more.
http://info.mail.yahoo.com/mail_250
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip