[cisco-voip] g711 sample size in CCM - 10ms or 20ms

[Andrew Dignan]

It can be configured in CallManager:

In Cisco CallManager, the voice payload size per packet is configurable on
a systemwide basis. This attribute is set in Cisco CallManager
Administration (Service > Service Parameters > select_server > Cisco
CallManager) with the following three service parameters:

PreferredG711MillisecondPacketSize—(Default setting: 20 ms. Available
settings: 10, 20, and 30 ms.)

[andy]

> There is a system parameter that set the preferred frame size.  Look
> under the "Clusterwide Parameters (System - Location and Region)"
> parameters under system parameters.
>
> Louis
>
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Erick B.
> Sent: Thursday, February 10, 2005 11:52 PM
> To: andy at dignans.com; cisco-voip at puck.nether.net
> Subject: [cisco-voip] g711 sample size in CCM - 10ms or 20ms
>
> I'm trying to figure out where to see/set the g711ulaw sample size in
> CCM that it uses for phone calls.
>
> I have a client with a voip monitoring device that is set to 10ms g711
> and it is giving some SLA errors. I just want to double check on CCM
> side if it is to 10ms or 20ms. This box has a 10 or 20mx setting for the
> codec.
>
>
>
> __________________________________
> Do you Yahoo!?
> Yahoo! Mail - now with 250MB free storage. Learn more.
> http://info.mail.yahoo.com/mail_250
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>