[cisco-voip] Sniffer Utility on CallManager Server

[Kevin Thorngren]

Hi Andrew,

The CallManager OS installs Network Monitor.  It an be found under 
Administrative Tools.  Once you have made your capture you can save at 
then open it with Ethereal on a different PC.  Or you can span or 
monitor the port that the CallManager is connected to.

Thanks,
Kevin
On Feb 14, 2005, at 12:31 PM, Andrew Herdman wrote:

>  
>
> Hi VoIP Enthusiasts,
>
>  
>
> I know it is against Cisco’s best practices to co-locate third party 
> software on the Callmanager servers.  However, we need to install some 
> sort of sniffer program (i.e. Ethereal 0.10.8 with WinCap 3.0) in 
> order to capture some much needed ‘Skinny’ traces.  Has anyone 
> successfully done this (whether short-term or long-term)?  Will the 
> WinCap utility conflict with any CallManager libraries or processes?  
> If this is not a recommended approach, is there a Cisco-supported 
> sniffer tool out there that I could install on the server?
>
>  
>
> Best regards,
>
>  
>
> Andrew Herdman
>
>  
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: text/enriched
Size: 1747 bytes
Desc: not available
Url : https://puck.nether.net/pipermail/cisco-voip/attachments/20050214/9231d14c/attachment.bin