[cisco-voip] Hunt Pilot Caller ID

[King, Jesse]

Bummer - Second suggestion didn't work, I think because it is not
finding the phone as being active, it won't attempt to ring it.
 
Thanks.
 
 

________________________________

From: Court Schuett [mailto:cschuett at hprlogistics.com] 
Sent: Tuesday, February 15, 2005 11:13 AM
To: King, Jesse; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Hunt Pilot Caller ID



I've run into the same issue.  

 

I worked around it two ways.  Just set it to the secondary line on a
person's phone and then rename that line on the phone to be Customer
Service or whatever.  

 

I think this will also work:  Create a dummy phone (VIP30 or something)
with a dummy MAC and add that as the first line in the HG.

 

Good luck.

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of King, Jesse
Sent: Tuesday, February 15, 2005 10:04 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Hunt Pilot Caller ID

 

CM 4.1 -

 

Created a Hunt Pilot, HL and HG - for Broadcast.

 

When dialing the HP, it always displays the caller id of the first
person in the HG. Is there a way to identify the pilot as (XYZ Pilot)
when it is dialed... I may be off base here, but it choosing the
alerting name of the first DN in the HG?

 

I know I can change the Connected Name Presentation to Restricted and it
will show up as Private, but it would be nice to name it....

 

Thoughts?

 

Thanks.

 

Jesse

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050215/290ccd50/attachment.html