[cisco-voip] Unity

[Voll, Scott]

It was in the Call handler.  I found it.

Transfer incoming calls?   
No (send directly to this handler's greeting)  
Yes, ring message recipient's extension:   
Yes, ring a subscriber at this extension: XXXX

Scott   

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voll, Scott
Sent: Tuesday, February 15, 2005 1:58 PM
To: Nick Marus; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Unity

I have that much of the puzzle.  I need to know how to make the
callhandler a DN rather then a Subscriber, or distribution list.

Scott

-----Original Message-----
From: Nick Marus [mailto:nmarus at gmail.com] 
Sent: Tuesday, February 15, 2005 1:50 PM
To: Voll, Scott; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Unity

Create a CallHandler, and assign it the DN of the route point. In the
transfer settings of the CallHandler, select "Yes, Ring a subscriber
at this extension" and make sure "transfer type" is "release to
switch".

You can then dial the DN from unity and it will tranfer to the DN of
your route point.

Or... In your mailbox, under caller input, map one of the 1-9 keys to
transfer to the call handler you created above, and then simply prompt
the user to press the "key" for your helpdesk in your greeting.


On Tue, 15 Feb 2005 10:23:18 -0800, Voll, Scott <Scott.Voll at wesd.org>
wrote:
> How do I make a Call handler go to a CM Route Point?  If it goes to my
> Voice mail I want the user to have the option of dialing a call
handler
> to my Helpdesk which is a IPCC Express Script (ICD) .
> 
> TIA
> 
> Scott
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 


-- 
Nick Marus
nmarus at gmail.com

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip