[cisco-voip] Sudden FXS problem

[Campbell, Jeremy]

This was a weird problem.  I restarted everything trying to get the
ports working again.  Since I'd made no config changes, I figured
restarting hardware would correct the issue.  Alas, it didn't have any
effect.  Today I arrived at the office ready to reconfigure all the
ports, hair pinning, route patterns, etc.  I don't know what caused the
problem, but when I started futzing with the configs I seem to have done
something that caused the ports to fix themselves.  

 

Thanks to those that responded to my original post.

 

Jeremy

 

________________________________________
Jeremy P. Campbell
Information Systems Director
Town of Davidson, NC
704-892-7591 ext. 248 - voice
704-892-3971 - fax

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Campbell,
Jeremy
Sent: Friday, February 18, 2005 12:51 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Sudden FXS problem

 

Hi everyone,

 

All of a sudden and without any config changes, my VIC-4FXS ports (in an
nm-hd-2v in a 2651XM) used for fax machines give fast busy on dialing.
I know these were working just a couple of days ago without issue.  They
receive okay, but they will not dial out.  I reset the gateway, rebooted
the router, and rebooted the CCM 4 server, but nothing I did had any
effect.

 

Has anyone else seen this sort of behavior?  Or, does anyone have any
suggestion as to where I might look to begin troubleshooting.  As I
mentioned above, they were working and I made no changes.  

 

Many thanks,

 

Jeremy

 

________________________________________
Jeremy P. Campbell
Information Systems Director
Town of Davidson, NC
704-892-7591 ext. 248 - voice
704-892-3971 - fax

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050221/7f190228/attachment-0001.html