[cisco-voip] Phones Ring at the same time

[Nick Marus]

I have been able to do this in 4.0 as well.

On Mon, 21 Feb 2005 11:11:18 -0600, Tim Frazee <tfrazee at gsgi.com> wrote:
> I am able to do this bcast ring (line group) without the AC stuff that you
> mentioned. running 4.0(2a)sr1a
> ________________________________
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Tim Medley
> Sent: Monday, February 21, 2005 10:25 AM
> To: 'Anthony Kouloglou'; 'cisco-voip at puck-nether.net'
> Subject: RE: [cisco-voip] Phones Ring at the same time
> 
> 
> 
> Depends on the version of CallManager. If you are running CCM 4.1 they you
> can setup a Broadcast hunt group and ring multiple phones simultaneously. In
> CCM 4.0 you can set up a broadcast hunt group as well, however, the
> users/phones that are being broadcast to need to be logged into the
> Attendant Console for the Broadcast to be enabled.
> 
>  
> 
> In CCM 3.x you will need to use a shared line.
> 
>  
> 
> tm
> 
>  
> 
>  
> 
> 
> Tim Medley
> 
>  
> 
> http://www.sccp2000.com 
> IP Telephony News, Tips and Tricks
> ________________________________
> 
> 
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Anthony Kouloglou
> Sent: Monday, February 21, 2005 11:18 AM
> To: cisco-voip at puck-nether.net
> Subject: [cisco-voip] Phones Ring at the same time
> 
>  
> 
> 
> Hi all,
> 
> 
> is there a way to make a group of phones to ring at the same time without
> having a shared line? Can this be done with a hunting group? Is there an
> option there to make them ring at the same time?
> 
> 
>  
> 
> 
> Thanks
> 
> 
> Anthony
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 
> 
> 


-- 
Nick Marus
nmarus at gmail.com