[cisco-voip] Phones Ring at the same time

[Tim Frazee]

I am able to do this bcast ring (line group) without the AC stuff that
you mentioned. running 4.0(2a)sr1a

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Tim Medley
Sent: Monday, February 21, 2005 10:25 AM
To: 'Anthony Kouloglou'; 'cisco-voip at puck-nether.net'
Subject: RE: [cisco-voip] Phones Ring at the same time



Depends on the version of CallManager. If you are running CCM 4.1 they
you can setup a Broadcast hunt group and ring multiple phones
simultaneously. In CCM 4.0 you can set up a broadcast hunt group as
well, however, the users/phones that are being broadcast to need to be
logged into the Attendant Console for the Broadcast to be enabled.

 

In CCM 3.x you will need to use a shared line.

 

tm

 

 

Tim Medley

 

http://www.sccp2000.com <http://www.sccp2000.com/>  IP Telephony News,
Tips and Tricks

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Anthony
Kouloglou
Sent: Monday, February 21, 2005 11:18 AM
To: cisco-voip at puck-nether.net
Subject: [cisco-voip] Phones Ring at the same time

 

Hi all,

is there a way to make a group of phones to ring at the same time
without having a shared line? Can this be done with a hunting group? Is
there an option there to make them ring at the same time?

 

Thanks

Anthony

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050221/8391711c/attachment.html