[cisco-voip] FXS module breaking

[Tim Medley]

What happens when the FXS module stops working? I suspect that a simple
reboot doesn't clear it up?

 

tm

 

Tim Medley

http://www.medleylabs.com

 

 <http://www.sccp2000.com/> http://www.sccp2000.com IP Telephony News, Tips
and Tricks

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of David Wilson
Sent: Monday, February 28, 2005 1:51 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] FXS module breaking

 

Hi guys,

 

A client of mine runs a Cisco 1700 series router with a FXS module in it to
route VOIP traffic over his WAN.

The FXS module plugs into his PBX. The problem is that the FXS module keeps
breaking every two weeks or so.

It just stops working. So far my client has been through 3 FXS modules in
the last month or so.

It works perfectly for a while then just dies.

 

Any ideas what could be causing this ? A mis-match between his PBX and the
FXS module that is popping it ?

Thanks in advance.

 


Kindest regards
David Wilson
_______________________________
D c D a t a
Tel +27 33 342 7003
Fax +27 33 345 4155
Cell +27 82 4147413
http://www.dcdata.co.za
support at dcdata.co.za
Powered by Linux, driven by passion ! 
_______________________________

 

"Computers are not intelligent. They only think they are."

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050228/7dfa535d/attachment-0001.html