[cisco-voip] SRST Question

[Wes Sisk]

Most likely the carrier gave up on the original incoming call.  do the 
debugs for the original incoming call setup show a failure with cause 
code "recovery on timer expire"?

/Wes

Erick B. wrote:

>Hi,
>
>I am wondering if there is a timer I can set to get a
>call forward to a PSTN Number to work after a IP Phone
>in fallback rings 4-5 times but does not answer. 
>
>If the phone is in use, the forward to the external
>PSTN # works fine since there is no delay. 
>
>But when phone is not in use, call comes in PRI to
>main # and when in fallback goes to a IP phone and it
>rings 4 or 5 times then it forwards to PSTN # for head
>end location VM and I see the outbound ISDN call setup
>then I hear a busy signal. Cause code is normal call
>clearing. 
>
>Any ideas?
>
>Also, is there a easy way to for a router in fallback
>to forward calls to a # and go into a VM box for this
>site without having a DID allocated at the head end?
>
>
>
>		
>__________________________________ 
>Do you Yahoo!? 
>Meet the all-new My Yahoo! - Try it today! 
>http://my.yahoo.com 
> 
>
>_______________________________________________
>cisco-voip mailing list
>cisco-voip at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-voip
>  
>