[cisco-voip] Cisco FXO and Norstar

[Eric Pylko]

Are there any issues related to integrating a Norstar with Cisco routers
using Cisco FXO ports? From reading about the FXO ports and the Norstar, I
am concerned about the following:

 

1. Router or Norstar not disconnecting calls - there is no supervisor
disconnect that gets generated by the port on the Norstar

2. Dial plan - I think I'll have to use an access code to get to an
attendant at another site; I can't create a dialplan to do direct dialing
between sites. The problem would be with calls coming in from the router to
the Norstar.

 

Or, am I just making things more complicated than they need to be? Just
stick in FXO ports, create the dialing plan on the routers and then have the
Norstar dial an access code to get one of the lines to the router?

 

Thanks

 

-Eric

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050104/0a23b02a/attachment.html