[cisco-voip] fxo+fxs modem passthrough

[Jared Mauch]

	so, i have a fairly simple dialplan set up
on a 2600 (nm-2v, vic-2fxs, vic-2fxo-m1) that will hand
a dialed number off from the vic-2fxs side to
the fxo side.

	last night i had a need to use a modem on this
path, and was wondering if there were some configuration
things that i need to add to the voice port..

	the modem wouldn't connect/negotiate over the link,
when it was basically a pick-up-fxo and outpulse number directly
inside the router..

	can anyone provide me some config help/guidance?  this isn't
using a cm or anything fancy, just a on-router dialplan/dial-peers

	- jared

-- 
Jared Mauch  | pgp key available via finger from jared at puck.nether.net
clue++;      | http://puck.nether.net/~jared/  My statements are only mine.