[cisco-voip] CM 4.1 and Unity
Ryan Ratliff
rratliff at cisco.com
Fri Jan 14 13:59:28 EST 2005
Check out the 4.0 release notes under the section "Cisco Unity
Voice-Mail Port Changes".
Basically we went from having the first vm port be the pilot number and
using CFB/CFNA to using an AC hunt group model for routing calls to
voicemail. Now your vm pilot is the number of the hunt list instead of
the first voicemail port. The vm ports don't forward anywhere instead
they are members of a line group that is added to the hunt list. The
hunt list takes care of routing the call to the appropriate port.
Please note that your pilot number now cannot be the number of your
first voicemail port. Many a TAC case was generated when people first
went to 4.0 and their calls wouldn't hunt because the hunt list and the
first voicemail port had the same dn.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/
prod_release_note09186a00801e87a5.html#wp1718355
-Ryan
On Jan 14, 2005, at 1:47 PM, Voll, Scott wrote:
> Who is using CM 4.1 and Unity?
>
> What do they mean by using hunt lists and line groups?
>
> TIA
>
> Scott
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
More information about the cisco-voip
mailing list