[cisco-voip] Active Directory Integration

[Anthony Mendoza]

I've been checking out the logs and other than the error itself "can't
get userid" which doesn't make much sense the logs aren't so helpful (at
least in plain text).   

--Anthony 
-----Original Message-----
From: Kevin Thorngren [mailto:kevint at cisco.com] 
Sent: Friday, January 21, 2005 10:12 AM
To: Anthony Mendoza
Cc: <cisco-voip at puck.nether.net>
Subject: Re: [cisco-voip] Active Directory Integration 

Hi Anthony,

A Sniffer capture of the problem will provide a lot of information
toward what is causing the problem.  Also, you can look at the log files
in c:\dcdsrvr\log.  Of interest would be Pluginsetup.trc which is a text
file that contains the installation log.  There are also a few different
log files generated that contain information about the LDAP requests.
Try your test again then look at the latest files generated. 
  Maybe this will help you find the problem.

Thanks,
Kevin

On Jan 21, 2005, at 12:36 PM, Anthony Mendoza wrote:

> DC=Niku,DC=com
>
> --Anthony
> -----Original Message-----
> From: Hering, Marc [mailto:MHering at TheGaleCompany.com]
> Sent: Friday, January 21, 2005 9:11 AM
> To: Anthony Mendoza; cisco-voip at puck.nether.net
> Subject: RE: [cisco-voip] Active Directory Integration
>
> When you installed the Plugin, what base OU did you set it to look in?
> We have the AD running on 3.3.4 and it works fine...but it was a bit 
> of a quirky install....
>
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Anthony 
> Mendoza
> Sent: Friday, January 21, 2005 9:21 AM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] Active Directory Integration
>
> I've got a new 4.0(2a)es22.1 cluster and am trying to do the active 
> directory integration.  Install of the plug-in goes great, however, 
> I'm getting this:
>
> "The following error occurred while trying to load the requested page.
>
>
> UID is null or empty string. Cannot get user info." whenever I tried 
> to edit a user.  Anyone that's done this have any ideas?
>
> Our AD Schema/OU Layout is a bit non-standard, but other than that I 
> have no frickin idea why it is not working.  Our Cisco Partner gave us

> an "engineering special" build, but that doesn't seem to work either.
> I'm looking for any pointers from any of the fine folks on this list!
>
> I'm about to re-install the plugin again or throw it all out and just 
> use DC Directory.  I'd really like to get the AD working though.
>
> Thanks,
> --
> Anthony Mendoza
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip


CONFIDENTIALITY NOTICE: The information contained in this message and
or attachments is intended only for the person or entity to which it is
addressed and may contain confidential and/or privileged material. Any
review, retransmission, dissemination, copying, or other use of this
information by persons or entities other than the intended recipient is
prohibited. If you received this e-mail or its attachments in error, 
please contact the sender and delete the material from any system and 
destroy any copies.