[cisco-voip] Transcoding

[Ryan Ratliff]

What do you expect to see the call as?

Is the CMM a voice gateway as well as a transcoder and cfb?  If so, 
calls between it and other devices in the same device pool are set up 
based on the region settings in CM.

-Ryan
On Jan 24, 2005, at 6:09 PM, Voll, Scott wrote:

> I have setup my CMM blade (12.3(8)xy2) ACT card  and CM sees it and 
> registers.  I have put it in the CSS of my remote site.  I have added 
> it to the MRG and placed it on a phone at my remote site.  But when it 
> calls my central site I’m still seeing it as a G729 call.  What’s 
> wrong?
>
>
>
> Scott
>
> PS.  Config below.
>
> mediacard 1
>
>  resource-pool Ad-Hoc dsps 2
>
>  resource-pool transcodeMcMinnville dsps 2
>
> !
>
> !
>
> sccp local GigabitEthernet1/0
>
> sccp ccm x.x.x.x identifier 2
>
> sccp ccm x.x.x.x identifier 1
>
> sccp
>
> !
>
> sccp ccm group 1
>
>  associate ccm 2 priority 2
>
>  associate ccm 1 priority 1
>
>  associate profile 2 register MTP001192b75643
>
>  associate profile 1 register CFB001192b75643
>
> !
>
> dspfarm
>
> !
>
> dspfarm profile 1 conference adhoc
>
>  codec g711ulaw packetization-period 30
>
>  codec g711alaw packetization-period 30
>
>  codec g729r8 packetization-period 30
>
>  codec g729ar8 packetization-period 30
>
>  codec g723r63 packetization-period 30
>
>  codec g723r53 packetization-period 30
>
>  associate resource-pool Ad-Hoc
>
> !
>
> dspfarm profile 2 transcode
>
>  codec g711ulaw packetization-period 30
>
>  codec g711alaw packetization-period 30
>
>  codec g729r8 packetization-period 30
>
>  codec g729ar8 packetization-period 30
>
>  codec g723r63 packetization-period 30
>
>  codec g723r53 packetization-period 30
>
>  associate resource-pool transcodeMcMinnville
>
> !
>
>  _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip