[cisco-voip] Home Cisco PSTN POTS Gateway

[Hering, Marc]

I think he just needs some FXO/FXS ports depending on what he wants to
do.  I have a 1720 router at home with a 2924 switch and I am just going
to toss a FXO card in it so I can play....   

Out of curiosity, does anyone know if Cisco offers a restriced version
of Call mgr for home use so engineers can learn and study for the cert
tests? Say something that offers full functionality but is restricted to
1 or 2 phones?    I was going to bid on a MCS that I saw on Ebay that
already has CCM 3.3 installed, but if they offer something that I can
use at home that would save me a bundle of cash (cash I don't really
have at the moment) 

Thanks!

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Vandy Hamidi
Sent: Monday, January 24, 2005 9:10 PM
To: cisco-voip at puck.nether.net
Cc: Greg Olson
Subject: [cisco-voip] Home Cisco PSTN POTS Gateway

I have a friend that just wants to setup a 2600 w/ a couple pots lines
and a call manager.

What is the minimum Hardware config he needs for the 2600?  Does he need
an AIM module?  VIC/FXO ports?

Sorry for sounding stupid, but I've always done this with PRI's.
Thanks,

	-=Vandy=-


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip