[cisco-voip] Home Cisco PSTN POTS Gateway
Walenta, Phil
philip.walenta at berbee.com
Mon Jan 24 21:19:41 EST 2005
I use a 2621 (non-XM), with an NM-2v, 1 FXO-M1, 1 FXS. Works dandy.
-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Vandy Hamidi
Sent: Monday, January 24, 2005 8:10 PM
To: cisco-voip at puck.nether.net
Cc: Greg Olson
Subject: [cisco-voip] Home Cisco PSTN POTS Gateway
I have a friend that just wants to setup a 2600 w/ a couple pots lines
and a call manager.
What is the minimum Hardware config he needs for the 2600? Does he need
an AIM module? VIC/FXO ports?
Sorry for sounding stupid, but I've always done this with PRI's.
Thanks,
-=Vandy=-
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
More information about the cisco-voip
mailing list