[cisco-voip] ATA Adaptors

[chris donnelly]

Hi Dawn, In the UK in my experience some analogue phones / devices will
have to connect via a PBX Master connector to get them to work correctly
(did this at a customers site the other day - they were just plugging
directly into an ATA - we put in a PBX Master connector first and it was
OK)

 

Go to the below link and do a search for PBX Master  for
description...BTW you can buy these from some telephone and some
electrical shops 

 

http://www.betterbox.co.uk <http://www.betterbox.co.uk/> 

 

 

 

 

 

 

  _____  

From: Martin.Dawn [mailto:Dawn.Martin at haltoncollege.ac.uk] 
Sent: 26 January 2005 09:53
To: chris donnelly
Subject: RE: [cisco-voip] ATA Adaptors

 

Hi Chris,

 

I haven't managed to try a standard phone as I didn't have the correct
leads to connect it to the minicom (the connection on our old phones
don't connect to the port on the adaptor).  I'll see if I can find a
lead / convertor to try this.

 

I don't think the ATA's connect via PBX Master Unit - not quite sure
what this is!

 

Thanks

 

Dawn

	-----Original Message-----
	From: chris donnelly [mailto:c.donnelly at skynetsystems.co.uk]
	Sent: 25 January 2005 15:47
	To: Martin.Dawn; cisco-voip at puck.nether.net
	Subject: RE: [cisco-voip] ATA Adaptors

	Hi Dawn,

	 

	Are you connecting to the ATA's via PBX Master units ? 

	 

	If you plug a standard analog phone into the ATA's are they
working OK ?

	 

	 

	 

	
  _____  


	From: Martin.Dawn [mailto:Dawn.Martin at haltoncollege.ac.uk] 
	Sent: 25 January 2005 13:55
	To: 'cisco-voip at puck.nether.net'
	Subject: [cisco-voip] ATA Adaptors

	 

	Hello, 

	I have purchased 3 x ATA 186 adaptors to use with minicoms.  The
ata adaptors have been picked up by the Cisco Call Manager (V3.3), but
they don't seem to be communicating with the minicoms.  I believe I may
need to change some of the settings for the adaptors to be compatible
with the minicoms as they are configured to work with standard phones by
default(?).  Does anyone know which settings have to be changed for the
adaptors to work with minicoms?

	Many Thanks in advance. 

	Dawn Martin 

	
********************************************************************** 

	This email contains information which may be confidential or
privileged. 

	The information is intended solely for the use of the individual
or entity 

	named above. If you are not the intended recipient, be aware
that any 

	disclosure, copying, distribution or use of the contents of this
information is prohibited. 

	If you have received this electronic transmission in error,
please notify us on 0151 257 2800 or by electronic mail at
postmaster at haltoncollege.ac.uk 

	immediately. Any opinions expressed are those of the author, not


	Halton College of FE and HE. This email does not constitute
either offer or acceptance of any contractually binding agreement. Such
offer or 

	acceptance must be communicated in writing. 

	
********************************************************************** 

	
	
_____________________________________________________________________
	This message has been checked for all known viruses by the
MessageLabs Virus Control Centre.


_____________________________________________________________________
This message has been checked for all known viruses by the MessageLabs
Virus Control Centre.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050126/7e21cc17/attachment-0001.html